Go back
Go back
All of the components included in the unassembled Telecaster mod 4-way wiring kit. This includes parts such as 250K vintage taper audio solid shaft 7% tolerance potentiometers, a Switchcraft mono input jack, a Mojotone dijon .047uF capacitor, one foot of pre-tinned cloth covered wire in white and black, an Oak Grigsby 4-way switch, and a volume mod cap & resistor.
#Z4T4W124-A

Un-Assembled Tele Mod 4-Way Wiring Kit

The 4-way Fender Tele® mod kit uses a custom 4-way switch to give you a fat humbucker tone in the 4th position while retaining the standard Tele® switching functions in the other 3 positions. You may need to lengthen the switch slot in your control plate for all 4 positions to be accessible. Use set screw knobs only.
$40.00
Shipping calculated at checkout.
$5 U.S. shipping over $99
Real support from real techs
Trusted by guitarists for 25+ years
SPECS

WEIGHT:lb

  • (2) CTS 250k vintage taper audio solid shaft 7% tolerance potentiometers
  • (1) Oak Grigsby 4-way switch
  • (1) Switchcraft mono input jack
  • (1) Mojotone Dijon .047uf capacitor
  • (1 ft) Pre-tinned cloth covered black wire
  • (1 ft) Pre-tinned cloth covered white wire
  • (1) Volume mod cap and resistor
DOCUMENTATION

MORE MUST-HAVE GEAR