$5 Shipping on Orders Over $99
FENDER SUPER 112
1990-1992
Configuration: Head
Power: 60 Watts
Effects: Reverb
SCHEMATIC
LAYOUT
- Front Panel: In, In, Volume (Clean), Gain, Volume (Drive), Channel Switch, Treble, Middle, Bass, Reverb, Presence, Foot Switch In, Standby Switch, Power Switch, Pilot Light
- Back Panel: 8 Ohm Speaker Out, 4 Ohm Speaker Out, Line Out, Power Amp In, Pre Amp Out
CABINET
- Tolex: Black
- Grill Cloth: Dark Gray
- Logo: Grill Mounted, Raised, Chrome & Black Script
- Handle: Black Strap
- Feet: Chrome Glides
- Corners: Chrome Corners w/ Lip
- Knobs: Red or Black Pointer Knob, Unnumbered
- Hardware: Medium Chassis Straps 4 5/8''
SPEAKER
- Size: 1 x 12
- Impedance: 8 ohms
- Model: ?
24 comments
Tubes are 1x 12AT7 2x 12AX7 2x 6L6GC The info needs to be amended to show this. I just repaired one of these and they have a 12AT7 for the clean channel, 12AX7 for the dirty channel, and another 12AX7 for the Phase Inverter. Then 2 6L6 tubes.
Love mine but it takes a while to heat up. Doesn’t sound good cold. Heavy SOB, too, but once it’s hot, it rolls, baby.
when using the overdrive pull the notch filter and set it between 12 and 2 0’clock….makes ALL the difference.
The trick to the overdrive is to pull the notch filter and set it somewhere between 0 and +2. Then set the overdrive knob somewhere between 2 and 4, and the volume around 1/2 to 1.
Could not agree more…………. I’ve had mine since 1992 20 yrs….. Big clean open sound…… not a fan of the over drive but a pedal immediately takes care of that…….. I switched out the red knobs for black ones. now it “looks” good and sounds even better………